19.24.070 Area, lot width and yard requirements.
Area, lot width, and yard requirements in the R-1 zone are as follows (see CVMC 19.16.020, 19.16.050, 19.16.060 and 19.16.080 for exceptions and modifications):
A. All buildings, including accessory buildings and structures in the single-family residence zone shall not cover more than 40 percent of the lot.
B. Minimum Dimensions. The following minimum dimensions shall be observed; provided, however, that such dimensions may be modified by the granting of a conditional use permit. The minimum requirements shall be one of the following district classifications as designated on the zoning map:
Setbacks in Feet |
|||||||
---|---|---|---|---|---|---|---|
Classification |
Minimum Lot Area (sq. ft.) |
Minimum Lot Width (ft.) |
Front |
Exterior Side Yard |
One Side Yard |
Both Side Yards |
Rear |
R-1-15 |
15,000 |
85 |
25 |
10 |
10 |
20 |
20 |
R-1-10 |
10,000 |
70 |
20 |
10 |
10 |
15 |
20 |
R-1-7 |
7,000 6,000 |
60 60 |
15 15 |
10 10 |
10 10 |
13 13 |
20 20 |
R-1-5 |
5,000 |
50 |
15 |
10 |
5 |
10 |
15 |
C. Existing developed lots of record (May 23, 1989) in the R-1-7 zone which measure less than 60 feet in width at the front setback may maintain the minimum side yards as noted above for the R-1-5 district for replacements or additions which constitute less than 50 percent of the floor area of the existing dwelling. (Ord. 3153 § 2 (Exh. A), 2010; Ord. 2311 § 1, 1989; Ord. 1356 § 1, 1971; Ord. 1237 § 1; Ord. 1212 § 1, 1969; prior code § 33.503(G)).